Outdoor to Indoor Penetration Loss at 28 GHz for Fixed Wireless Access

This paper present the results from a 28 GHz channel sounding campaign performed to investigate the effects of outdoor to indoor penetration on the wireless propagation channel characteristics for an urban microcell in a fixed wireless access scenario. The measurements are performed with a real-time channel sounder, which can measure path loss up to 169 dB, and equipped with phased array antennas that allows electrical beam steering for directionally resolved measurements in dynamic environments. Thanks to the short measurement time and the excellent phase stability of the system, we obtain both directional and omnidirectional channel power delay profiles without any delay uncertainty. For outdoor and indoor receiver locations, we compare path loss, delay spreads and angular spreads obtained for two different types of buildings

5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments

For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This document presents a preliminary overview of 5G channel models for bands up to 100 GHz. These have been derived based on extensive measurement and ray tracing results across a multitude of frequencies from 6 GHz to 100 GHz, and this document describes an initial 3D channel model which includes: 1) typical deployment scenarios for urban microcells (UMi) and urban macrocells (UMa), and 2) a baseline model for incorporating path loss, shadow fading, line of sight probability, penetration and blockage models for the typical scenarios. Various processing methodologies such as clustering and antenna decoupling algorithms are also presented.Comment: To be published in 2016 IEEE 83rd Vehicular Technology Conference Spring (VTC 2016-Spring), Nanjing, China, May 201

Millimeter wave beamforming for wireless backhaul and access in small cell networks and practical approaches in software-defined radio

Mobile data traffic will continue its tremendous growth in some markets, and has already resulted in an apparent radio spectrum scarcity. There is a strong need for more efficient methods to use spectrum resources, leading to extensive research on increasing spectrum reusability on flexible radio platforms. This study solves this problem in two sub topics, millimeter wave communication on wireless backhaul for spectrum reusability, and flexible prototyping radio platform using software-defined radio (SDR). Wireless backhaul has received significant attention as a key technology affecting the development of future wireless cellular networks because it helps to easily deploy many small size cells, an essential part of a high capacity system. Millimeter wave is considered a possible candidate for cost-effective wireless backhaul. In the outdoor deployment using a millimeter wave, beamforming methods are key techniques to establish wireless links in the 60 GHz to 80 GHz to overcome pathloss constraints (i.e., rainfall effect and oxygen absorption). The millimeter wave communication system cannot directly access the channel knowledge. To overcome this, a beamforming method based on codebook search is considered. The millimeter wave communication cannot access channel knowledge, therefore alternatively a beamforming method based on a codebook search is considered. In the first part, we propose an efficient beam alignment technique using adaptive subspace sampling and hierarchical beam codebooks. A wind sway analysis is presented to establish a notion of beam coherence time. This highlights a previously unexplored tradeoff between array size and wind-induced movement. Generally, it is not possible to use larger arrays without risking a performance loss from wind-induced beam misalignment. The performance of the proposed alignment technique is analyzed and compared with other search and alignment methods. Results show significant performance improvement with reduced search time. In the second part of this study, SDR is discussed as an approach toward flexible wireless communication systems. Most layers of SDR are implemented by software. Therefore, only a software change is needed to transform the type of radio system. The translation of the signal processing into software performed by a regular computer opens up a huge number of possibilities at a reasonable price and effort. SDR systems are widely used to build prototypes, saving time and money. In this project, a robust wireless communication system in high interference environment was developed. For the physical layer (PHY) of the system, we implemented a channel sub-bandding method that utilizes frequency division multiplexing to avoid interference. Then, to overcome a further interfered channel, Direct Spread Spectrum System (DSSS) was considered and implemented. These prototyped testbeds were evaluated for system performance in the interference environment

Intra-cluster characteristics of 28 GHz wireless channel in urban micro street canyon

This paper investigates intra-cluster channel characteristics of non line-of-sight (NLOS) 28 GHz channels in street canyon scenarios. These channel characteristics include cluster numbers, number of subpaths within each cluster, intra-cluster delay spreads, and intra-cluster angular spreads. Both measurement and ray tracing results are presented and compared. Furthermore, distribution fittings are performed and models and parameters for different intra-cluster channel characteristics are proposed

Path loss models with distance-dependent weighted fitting and estimation of censored path loss data

Path loss models are the most fundamental part of wireless propagation channel models. Path loss is typically modelled as a (single-slope or multi-slope) power-law dependency on distance plus a log-normally distributed shadowing attenuation. Determination of the parameters of this model is usually done by fitting the model to results from measurements or ray tracing. The authors show that the typical least-square fitting to those data points is inherently biased to give the best fitting to the link distances that happen to have more evaluation points. A weighted fitting method is developed that emphasises the accuracy at the distance range that is consciously chosen by the user as most important for a system simulation. As a further important point that is typically not taken into account for path loss parameter extraction, the authors show that typically measurement data (but also ray tracing) is censored, i.e. path loss values above a certain threshold cannot be measured. The authors present examples of weighted fitting models, and models with and without the censored data, for 28 GHz channels in urban macrocells, and show that these effects have a significant impact on the extracted parameters and that the fitting accuracy can be improved with the presented methods